Chrome finish tail light support bracket. Unavailable for many years, now back in production

Also available in black

 This part is available by special order, request a quote

 14474370 GU14474370 14 47 43 70
 1447 4370 1447.4370 14.47.43.70

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

 More than 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Threaded exhaust flange and nut set, two required per engine

 This part is due back in stock soon, call 01484 841395 to reserve yours

 12120200 GU12120200 12 12 02 00
 1212 0200 1212.0200 12.12.02.00

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 More than 5 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

10 spline connection sleeve to connect drive box to driveshaft

 This part is due back in stock soon, call 01484 841395 to reserve yours

12327700-z 12327700 GU12327700 12 32 77 00
 1232 7700 1232.7700 12.32.77.00

Steel intermediate clutch plate

 This part is due back in stock soon, call 01484 841395 to reserve yours

12082300-z 12082300 GU12082300 12 08 23 00
 1208 2300 1208.2300 12.08.23.00

Kit containing two replacement 60cm silicon HT leads, lead ends and 90° plug caps. The leads are suppied as a single double length lead so you can cut it into two leads of the exact required length. Includes crimp on lead ends for standard big twin 12v round coils

Suitable for most models with coils under the tank where the HT lead is not moulded into the ignition coil. We recommend checking what type of plug cap you have and measuring your existing cable run to check this part will fit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Con rod bearing shell

4 required per engine. Also known as Guzzi ref. 12062000, 12062005, 28062050 Hole pattern may vary from the original part

 This part is due back in stock soon, call 01484 841395 to reserve yours

 30062000 GU30062000 30 06 20 00
 3006 2000 3006.2000 30.06.20.00

Con rod bearing shell 1st oversize -0.254MM

 This part is available by special order, request a quote

 30062001 GU30062001 30 06 20 01
 3006 2001 3006.2001 30.06.20.01

Chrome finish plastic CEV 18343 type indicator with amber lens and 21W bulb

Indicator mounts available separately, see LIA19751. Also known as Ducati part 079903444.1 079903444.2

 This part is due back in stock soon, call 01484 841395 to reserve yours

18750656-z 18750656 GU18750656 18 75 06 56
 1875 0656 1875.0656 18.75.06.56

Also fits Ducati Pantah, Most Ducati Bevels